MASTER EFFECT Settings
Here are the master effect settings that are applied to the final stage of the master out signal.
- The master effect is not applied to sound that’s output from the DIRECT OUT jacks.
- If “Master Direct Sw” is set to “DIRECT” in “OUTPUT”, the master effect is not applied to the sound coming from the MASTER OUT jacks.
For each master effect type, one, two or more predetermined parameters are assigned to the [MASTER EFFECT] knob.
You only need to switch the MASTER EFFECT on and turn the [MASTER EFFECT] knob to apply the effect to the sound outputted from MASTER OUT.
Parameter | Value | Explanation |
|---|---|---|
Type | Ø “Effect List” | Sets the MASTER EFFECT type. |
Level | -INF–+6.0 dB | Sets the effect output level. |
(Effect parameters) | Ø “Effect List” | Ø “Effect List” For each master effect type, the predetermined parameters are assigned to the [MASTER EFFECT] knob. (KNOB) is shown next to these parameters. |
Master Effect Setting | KIT, SYSTEM | KIT: Sets the master effect for each kit (note that the remain function is not available) SYSTEM: Configures the master effect for the SPD-SX PRO overall |
Button | Explanation |
|---|---|
[F1] (KIT) | Sets the master effect for the kit. |
[F2] (SYSTEM) | Sets the master effect for the system. |
[F6] (ON/OFF) | Turns the MASTER EFFECT on/off. You can also set this using the MASTER EFFECT [ON/OFF] button. |
MEMO
Hold down the [SHIFT] button and press the MASTER EFFECT [ON/OFF] button to switch to the MASTER EFFECT screen.