MASTER EQ Settings
Here’s how to configure the settings for the four-band parametric equalizer (master EQ) that’s applied at the final stage of the master out.
- The master EQ effects are not applied to sound that’s output from the DIRECT OUT jacks.
- If “Master Direct Sw” is set to “DIRECT” in “OUTPUT”, the master EQ effect is not applied to the sound coming from the MASTER OUT jacks.
Parameter | Value | Explanation |
|---|---|---|
Type (only LOW and HIGH) | SHELV (Shelving), PEAK (MID1 and MID2: fixed to “PEAK”) | Selects how the equalizer effect works. |
Q | 0.5–16.0 (only when Type is set to “PEAK”) | Adjusts the bandwidth of the frequency region. Set a higher value to narrow the range to be affected. |
Freq | 20 Hz–1 kHz (LOW) 20 Hz–16 kHz (MID1, 2) 1 kHz–16 kHz (HIGH) | Adjusts the center frequency. |
Gain | -12–+12 dB | Adjusts the amount of boost/cut. |
Kit Volume | -INF, -60.0–+6.0 dB | Adjusts the volume of the kit. |
Button | Explanation |
|---|---|
[F5] (ON/OFF) | Turns the MASTER EQ on/off. |
[F6] (DEFAULT) | Restores the MASTER EQ settings to their default values. |