Setting the volume, sound and other settings ([F2] SETUP)
Use the cursor [à] [á] buttons to select a parameter, and use the [-] [+] buttons or the [VALUE] knob to edit the value.
Parameter | Value | Explanation |
|---|---|---|
Click Mode | PLAY INTERNAL CLICK, PLAY WAVE as CLICK, PLAY WAVE as CLICK-TRACK | Selects the click mode. PLAY INTERNAL CLICK: This mode uses the built-in click sound. PLAY WAVE as CLICK: This mode uses a preloaded wave or a wave imported by the user. NOTE If a waveform is selected with PLAY WAVE as CLICK, the wave at the accent position does not sound. The wave only sounds at the quarter note, eighth note, sixteenth note and triplet timings.
PLAY WAVE as CLICK-TRACK: This mode uses the click track wave imported by the user. |
Click Sound (PLAY INTERNAL CLICK) Click Wave (PLAY WAVE as CLICK) Click-Track Wave (PLAY WAVE as CLICK-TRACK) | METRONOME, BEEP, WOOD BLOCK, STICKS, CLAVES, AGOGO, TRIANGLE, TAMBOURINE, BELL, CABASA 0–20000 0–20000 | Click Sound: the built-in click sound Click Wave: a preloaded wave or a wave imported by the user Click-Track Wave: the click track wave imported by the user |
Volume | -INF–+6.0dB | Sets the click volume. |
Pan | L15–CENTER–R15 | Adjusts the pan (left-right balance) of the click sound. |
Click Start Pad (Range) | OFF, P1–9, T1–8, F1, F2 | The click starts once you strike the selected pad. Select a desired pad or select a range of pads. Example: if you want the click to start when either pad 1, 2 or 3 is struck, set the range as “P1–P3”. |
Pad Click Trig Type | ONE-TIME, RETRIGGER, ALTERNATE | Selects how the click operates when you strike a pad that’s set as a click start pad. ONE TIME: The click starts once you strike the pad. RETRIGGER: The click restarts from the first beat every time you strike the pad. ALTERNATE: The click starts/stops with each strike of the pad. |
Click-Track Loop | OFF, ON | Plays back the wave to use as a click track in a loop (only enabled when “Click Mode” is “PLAY WAVE as CLICK-TRACK”). |
LED Reference | OFF, ON | Sets whether the TEMPO indicator blinks in time with the click (ON) or does not blink (OFF). (This is enabled when Click Mode is “PLAY INTERNAL CLICK” or “PLAY WAVE as CLICK”.) |