Using an Image File as the Screen Saver

You can import the image files (BMP) from a USB flash drive into the SPD-SX PRO and make them display in the LCD when the screen saver starts.

  1. On your computer or similar device, copy the image file (BMP) you want to import into the “IMAGE” folder of your USB flash drive.
  2. Connect the USB flash drive to the SPD-SX PRO.
  3. On the SCREEN SAVER screen, press the [F5] (IMPORT) button.
  4. The SCREEN SAVER IMAGE IMPORT screen appears.

  6. Button

    Explanation

    Cursor [à] [á] buttons

    Moves the cursor.

    Cursor [ã] [â] buttons

    Moves up or down in the folder directory.

    [F6] (IMPORT) button

    Imports the data.

  7. Press the [F6] (IMPORT) button.
  8. The IMPORT TO window appears.
  10. Use the [-] [+] buttons to set the import destination number.

  11. Parameter

    Value

    Explanation

    Screen Saver Image No.

    1–16

    Import destination number

  12. Button

    Explanation

    [F4] (EXIT) button

    Closes the IMPORT TO window.

    [F6] (IMPORT) button

    Saves the image.

  13. To execute, press the [F6] (IMPORT) button.
  14. To cancel the operation, press the [F4] (EXIT) button.

NOTE

Points to remember when importing image files

  1. Filenames that contain double-byte characters do not display correctly.
  2. Supported formats: JPEG, PNG (except for files saved in interlaced format), BMP (24-bit only)
  3. If the message “Image size is too large/small!” is shown, modify the image size and try importing again.
  4. If an image file that differs from the 480 (w) × 272 (h) pixel size is imported, the image is automatically enlarged or reduced and trimmed.