2Tap Pan Delay
Parameter | Value | Explanation |
|---|---|---|
Tempo Sync | OFF, ON | If this is ON, the delay synchronizes with the tempo. |
Delay Time (msec) | 1–2600 [msec] | Adjusts the delay time from the direct sound until the second delay sound is heard. |
Delay Time (note) | Note Ø “Note” | |
Delay Feedback (*1) | -98–+98 [%] | Adjusts the proportion of the delay sound that is fed back into the effect. Negative (-) settings will invert the phase. |
Delay HF Damp | 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS [Hz] | Adjusts the frequency above which the delay sound fed back to the effect is filtered out (BYPASS: no cut). |
Delay 1 Pan | L64–63R | Stereo location of Delay 1 |
Delay 2 Pan | L64–63R | Stereo location of Delay 2 |
Delay 1 Level | 0–127 | Volume of delay 1 |
Delay 2 Level | 0–127 | Volume of delay 2 |
Low Gain | -15–+15 [dB] | Gain of the low range |
High Gain | -15–+15 [dB] | Gain of the high range |
Balance | D100:0W–D0:100W | Adjusts the volume balance between the sound that is sent through the delay (W) and the sound that is not sent through the delay (D). |
Level | 0–127 | Output Level |
*1: This parameter corresponds to MFX CTRL. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.