Isolator
This is an equalizer which cuts the volume greatly, allowing you to add a special effect to the sound by cutting the volume in varying ranges.
Parameter | Value | Explanation |
|---|---|---|
Boost/Cut Low (*1) | -60–+4 [dB] | These boost and cut each of the High, Middle, and Low frequency ranges. At -60 dB, the sound at that frequency band becomes inaudible. 0 dB is equivalent to the input level of the sound. |
Boost/Cut Mid | -60–+4 [dB] | |
Boost/Cut High | -60–+4 [dB] | |
Anti Phase Low Sw | OFF, ON | Turns the Anti-Phase function on/off for the low frequency ranges. When turned on, the counter-channel of stereo sound is inverted and added to the signal. |
Anti-Phase Low Level | 0–127 | Adjusts the level settings for the anti-phase low frequency ranges. Adjusting this level for certain frequencies allows you to lend emphasis to specific parts. (This is effective only for stereo source.) |
Anti Phase Mid Sw | OFF, ON | Settings of the Anti-Phase function for the Middle frequency ranges. The parameters are the same as for the Low frequency ranges. |
Anti Phase Mid Level | 0–127 | |
Low Boost Sw | OFF, ON | Turns Low Booster on/off. This emphasizes the low-end to create a heavy bass sound. |
Low Boost Level | 0–127 | Amount of low-end boost. Depending on the Isolator and filter settings, this effect may be hard to distinguish. |
Level | 0–127 | Output Level |
*1: This parameter corresponds to MFX CTRL. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.