Humanizer
Adds a vowel character to the sound, making it similar to a human voice.
Parameter | Value | Explanation |
|---|---|---|
Drive Sw | OFF, ON | Overdrive on/off |
Drive | 0–127 | Degree of distortion Also changes the volume. |
Vowel1 | a, e, i, o, u | Selects the vowel. |
Vowel2 | a, e, i, o, u | Selects the vowel. |
Rate (sync sw) | OFF, ON | If this is ON, the rate synchronizes with the tempo of the rhythm. |
Rate (Hz) | 0.05–10.00 [Hz] | Frequency at which the two vowels switch |
Rate (note) | Note Ø “Note” | |
Depth (*1) | 0–127 | Depth of the effect |
Input Sync Sw | OFF, ON | LFO reset on/off If this is ON, the LFO for switching the vowels is reset by the input signal. |
Input Sync Threshold | 0–127 | Volume level at which reset is applied |
Manual | 0–100 | Point at which Vowel 1/2 switch 0–49: Vowel 1 will have a longer duration. 50: Vowel 1 and 2 will be of equal duration. 51–100: Vowel 2 will have a longer duration. |
Low Gain | -15–+15 [dB] | Gain of the low range |
High Gain | -15–+15 [dB] | Gain of the high range |
Pan | L64–63R | Stereo location of the output sound |
Level | 0–127 | Output Level |
*1: This parameter corresponds to MFX CTRL. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.