Mid-Side EQ
This effect allows the left/right signals that have similar phase to be tonally adjusted in a different way than the left/right signals that have different phase.
Parameter | Value | Explanation |
|---|---|---|
M EQ Switch (*1) | OFF, ON | Switches whether to apply tonal adjustment to left/right input signals that are nearly (or fully) in phase. |
M Input Gain | -12.00–+12.00 [dB] | Volume of left/right input signals that are nearly (or fully) in phase |
M Low Frequency | 20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400 [Hz] | Frequency of the low range |
M Low Gain | -12.00–+12.00 [dB] | Gain of the low range |
M Mid1 Frequency | 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] | Frequency of the middle range 1 |
M Mid1 Gain | -12.00–+12.00 [dB] | Gain of the middle range 1 |
M Mid1 Q | 0.5, 1.0, 2.0, 4.0, 8.0 | Width of the middle range 1 Set a higher value to narrow the range to be affected. |
M Mid2 Frequency | 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] | Frequency of the middle range 2 |
M Mid2 Gain | -12.00–+12.00 [dB] | Gain of the middle range 2 |
M Mid2 Q | 0.5, 1.0, 2.0, 4.0, 8.0 | Width of the middle range 2 Set a higher value to narrow the range to be affected. |
M Mid3 Frequency | 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] | Frequency of the middle range 3 |
M Mid3 Gain | -12.00–+12.00 [dB] | Gain of the middle range 3 |
M Mid3 Q | 0.5, 1.0, 2.0, 4.0, 8.0 | Width of the middle range 3 Set a higher value to narrow the range to be affected. |
M High Frequency | 2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000, 12500, 16000 [Hz] | Frequency of the high range |
M High Gain | -12.00–+12.00 [dB] | Gain of the high range |
S EQ Switch | OFF, ON | Switches whether to apply tonal adjustment to left/right input signals whose signals are considerably out of phase. |
S Input Gain | -12.00–+12.00 [dB] | Volume of left/right signals whose signals are considerably out of phase |
S Low Frequency | 20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400 [Hz] | Frequency of the low range |
S Low Gain | -12.00–+12.00 [dB] | Gain of the low range |
S Mid1 Frequency | 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] | Frequency of the middle range 1 |
S Mid1 Gain | -12.00–+12.00 [dB] | Gain of the middle range 1 |
S Mid1 Q | 0.5, 1.0, 2.0, 4.0, 8.0 | Width of the middle range 1 Set a higher value to narrow the range to be affected. |
S Mid2 Frequency | 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] | Frequency of the middle range 2 |
S Mid2 Gain | -12.00–+12.00 [dB] | Gain of the middle range 2 |
S Mid2 Q | 0.5, 1.0, 2.0, 4.0, 8.0 | Width of the middle range 2 Set a higher value to narrow the range to be affected. |
S Mid3 Frequency | 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] | Frequency of the middle range 3 |
S Mid3 Gain | -12.00–+12.00 [dB] | Gain of the middle range 3 |
S Mid3 Q | 0.5, 1.0, 2.0, 4.0, 8.0 | Width of the middle range 3 Set a higher value to narrow the range to be affected. |
S High Frequency | 2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000, 12500, 16000 [Hz] | Frequency of the high range |
S High Gain | -12.00–+12.00 [dB] | Gain of the high range |
Level | 0–127 | Output Level |
*1: This parameter corresponds to MFX CTRL. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.