Flanger

This is a stereo flanger (The LFO has the same phase for left and right.).

The effect produces a metallic resonance that rises and falls like a jet airplane taking off or landing.

A filter is provided so that you can adjust the timbre of the flanged sound.

Parameter

Value

Explanation

Filter Type

OFF, LPF, HPF

Type of filter

OFF: No filter is used.

LPF: Cuts the frequency range above the Cutoff Freq

HPF: Cuts the frequency range below the Cutoff Freq

Cutoff Freq

200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]

Basic frequency of the filter

Pre Delay

0.0–100 [msec]

Adjusts the delay time from the direct sound until the flanger sound is heard.

Tempo Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

ØSetting the kit tempo (KIT TEMPO)

Rate (Hz)

0.05–10.00 [Hz]

Frequency of modulation

Rate (note)

Note

ØNote

Depth (*1)

0–127

Depth of modulation

Phase

0–180 [deg]

Spatial spread of the sound

Feedback

-98–+98 [%]

Adjusts the proportion of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase.

Low Gain

-15–+15 [dB]

Gain of the low range

High Gain

-15–+15 [dB]

Gain of the high range

Balance

D100:0W–D0:100W

Volume balance between the direct sound (D) and the flanger sound (W)

Level

0–127

Output Level

*1: This parameter corresponds to MFX CTRL. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.

*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.