Chorus
This is a stereo chorus. A filter is provided so that you can adjust the timbre of the chorus sound.
Parameter | Value | Explanation |
|---|---|---|
Filter Type | OFF, LPF, HPF | Type of filter OFF: No filter is used. LPF: Cuts the frequency range above the Cutoff Freq HPF: Cuts the frequency range below the Cutoff Freq |
Cutoff Freq | 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] | Basic frequency of the filter |
Pre Delay | 0.0–100 [msec] | Adjusts the delay time from the direct sound until the chorus sound is heard. |
Tempo Sync | OFF, ON | If this is ON, the rate synchronizes with the tempo of the rhythm. |
Rate (Hz) | 0.05–10.00 [Hz] | Frequency of modulation |
Rate (note) | Note Ø “Note” | |
Depth (*1) | 0–127 | Depth of modulation |
Phase | 0–180 [deg] | Spatial spread of the sound |
Low Gain | -15–+15 [dB] | Gain of the low range |
High Gain | -15–+15 [dB] | Gain of the high range |
Balance | D100:0W–D0:100W | Volume balance between the direct sound (D) and the chorus sound (W) |
Level | 0–127 | Output Level |
*1: This parameter corresponds to MFX CTRL. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.