LOFI Compress
Degrades the sound quality.
Parameter | Value | Explanation |
|---|---|---|
Pre Filter Type | 1, 2, 3, 4, 5, 6 | Selects the type of filter applied to the sound before it passes through the Lo-Fi effect. 1: Compressor off 2–6: Compressor on |
LoFi Type | 1, 2, 3, 4, 5, 6, 7, 8, 9 | Degrades the sound quality. The tone character grows poorer as this value is increased. |
Post Filter Type | OFF, LPF, HPF | Selects the type of filter applied to the sound after it passes through the Lo-Fi effect. OFF: No filter is used. LPF: Cuts the frequency range above the Cutoff Freq HPF: Cuts the frequency range below the Cutoff Freq |
Post Filter Cutoff | 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] | Basic frequency of the Post Filter |
Low Gain | -15–+15 [dB] | Gain of the low range |
High Gain | -15–+15 [dB] | Gain of the high range |
Balance (*1) | D100:0W–D0:100W | Volume balance between the direct sound (D) and the effect sound (W) |
Level | 0–127 | Output Level |
*1: This parameter corresponds to MFX CTRL. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.