Speaker Simulator
Simulates the speaker type and microphone settings used to record the speaker sound.
Parameter | Value | Explanation | ||
|---|---|---|---|---|
Speaker Type |
| Cabinet | Diameter (in inches) and number of the speaker
| Microphone |
SMALL 1 | Small open-back enclosure | 10 | Dynamic | |
SMALL 2 | Small open-back enclosure | 10 | Dynamic | |
MIDDLE | Open back enclosure | 12 x 1 | Dynamic | |
JC-120 | Open back enclosure | 12 x 2 | Dynamic | |
BUILT-IN 1 | Open back enclosure | 12 x 2 | Dynamic | |
BUILT-IN 2 | Open back enclosure | 12 x 2 | Condenser | |
BUILT-IN 3 | Open back enclosure | 12 x 2 | Condenser | |
BUILT-IN 4 | Open back enclosure | 12 x 2 | Condenser | |
BUILT-IN 5 | Open back enclosure | 12 x 2 | Condenser | |
BG STACK 1 | Sealed enclosure | 12 x 2 | Condenser | |
BG STACK 2 | Large sealed enclosure | 12 x 2 | Condenser | |
MS STACK 1 | Large sealed enclosure | 12 x 4 | Condenser | |
MS STACK 2 | Large sealed enclosure | 12 x 4 | Condenser | |
MTL STACK | Large double stack | 12 x 4 | Condenser | |
2-STACK | Large double stack | 12 x 4 | Condenser | |
3-STACK | Large triple stack | 12 x 4 | Condenser | |
Mic Setting | 1, 2, 3 | Adjusts the location of the microphone that is recording the sound of the speaker. This can be adjusted in three steps, with the microphone becoming more distant in the order of 1, 2, and 3. | ||
Mic Level | 0–127 | Mic volume | ||
Direct Level (*1) | 0–127 | Volume of the direct sound | ||
Level | 0–127 | Output Level | ||
*1: This parameter corresponds to MFX CTRL. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.