Editing the output audio settings

This shows you how to set the delay time for the output audio and modify the audio that’s output from the LINE OUT jack and USB port.

 

  1. On the menu screen, click the “OUTPUT” tab and set the parameters in the respective menus.

 

 

Menu

Value

Explanation

DELAY

Off, On

Turns the delay on/off. When this is “On”, the audio output is delayed by the specified time.

  • Delay is applied to the STREAM MIX bus audio that’s output from the USB port.

Correcting timing discrepancies between video and audio

When streaming games on your computer, you might notice that what you see on the game screen is not in sync with the game sound (the audio signal that’s input from the BRIDGE CAST ONE to your computer). By applying delay to the audio output, you can make the timing of the video and audio match.

0.0–1000.0ms

Adjusts the delay time (audio latency).

LINE OUT MODE

This selects the audio to be output from the LINE OUT jack.

MIC

Mic audio (not routed through a bus)

STREAM MIX

STREAM MIX bus audio

PHONES SYNC

Same audio as the headphones output

USB OUT MODE (CONSOLE)

When the USB connection setting switch is set to “CONSOLE”, this configures the audio that’s output from the USB port.

MIC

Mic audio (not routed through a bus)

STREAM MIX

STREAM MIX bus audio

SUB MIX MODE

When the USB connection setting switch is set to “PC”, this sets which audio signal is output from the USB port.

PERSONAL

The PERSONAL MIX bus audio is output.

MIC (DRY)

The mic audio before passing through the MIC CLEANUP section and the voice transformer is output.

AUX

The audio that’s input from the AUX jack is output.