Configuring the mic settings on this unit

 

  1. Long-press the MUTE/ASSIGN [MIC] button.
  2. The channel indicator blinks yellow/red alternately, and the unit enters mic setup mode.
  3. Press the dial while holding the MUTE/ASSIGN [MIC] button to toggle the MUTE/ASSIGN indicator that lights up.
  4. Each press of the dial switches to a different MUTE/ASSIGN indicator, and the mic settings can be changed according to the MUTE/ASSIGN indicator that’s lit.
  5. Turn the dial while long-pressing the MUTE/ASSIGN [MIC] button to edit the settings.
  6. Cell_across_pages

    MUTE/ASSIGN indicators

    Explanation

    MIC

    Adjusts the mic input gain (sensitivity).

    â BRIDGE CAST app: Adjusting the input gain (sensitivity) for the mic

    CHAT

    Selects the type of mic you’re using.

    The type of mic to use must be set in order to input audio from a mic.

     

    Turn counterclockwise (the left half of the level meter lights up)

    Dynamic mic (when phantom power is off)

    Condenser mic (when phantom power is on)

    Clockwise (the right half of the level meter lights up)

    Headset

    â BRIDGE CAST app: Selecting the type of mic

    GAME

    Switches the phantom power supply (+48 V) to the MIC jack on/off.

    Turn counterclockwise (the left half of the level meter lights up)

    Switches phantom power off. The 48V indicator goes dark.

    Clockwise (the right half of the level meter lights up)

    Switches phantom power on. Phantom power is provided when the 48V indicator changes from blinking to remaining lit.

    When connecting a dynamic mic or a condenser mic that operates on battery power, make sure to turn phantom power off. These types of mics may malfunction when supplied with phantom power.

     

    â BRIDGE CAST app: Selecting the type of mic

  8. When you have finished editing the settings, take your finger off the MUTE/ASSIGN [MIC] button to exit mic settings mode.