BASS FLANGER

This is a flanger effect for bass guitar.


Parameter	Value	Explanation
ON/OFF	OFF, ON	Turns this effect on/off.
RATE	0–100, BPMŀ–Ō	Sets the rate of the flanging effect. When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song. If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time. ŀ is a double whole note, which is twice as long as a whole note.
DEPTH	0–100	Determines the depth of the flanging effect.
LEVEL	0–100	Adjusts the volume of the flanger.
MANUAL	0–100	Adjusts the center frequency at which to apply the effect.
RESO	0–100	Determines the amount of resonance (feedback). Increasing the value emphasizes the effect, for a more unusual sound.
DIRECT	0–100	Adjusts the volume of the direct sound.
LOW CUT	FLAT, 20.0 Hz–12.5 kHz	Sets the frequency at which the low cut filter begins to take effect. When “FLAT” is selected, the low cut filter has no effect.
STEP RATE	OFF, 0–100, BPM ŀ–Ō	This sets the cycle of the step function that changes the rate and depth. When it is set to a higher value, the change will be finer. Set this to “0” when not using the Step function.