HARDWARE SETTINGS
Parameter | Value | Explanation |
|---|---|---|
EXP HOLD | ON | When you switch memories, the operational state (the pedal tilt position) of the EXP PEDAL before switching is carried over to the memory after switching. |
OFF | The operational states (pedal tilt position) of the EXP PEDAL is not carried over when memories are switched. | |
LOCK | OFF, ON | Enables/disables the knob operations. |
COLOR | FULL | The screen displays in color. The LED indicator colors change depending on the effect type and so on. The screen displays in color. |
RED | The screen displays in black and white. The LED indicators basically display in red. When a function is used for which the color change is necessary, the colors yellow, blue and white are used to make the state easy to distinguish. | |
BLUE | The screen displays in black and white. The LED indicators basically display in blue. When a function is used for which the color change is necessary, the colors red, yellow and white are used to make the state easy to distinguish. | |
GREEN | The screen displays in black and white. The LED indicators basically display in green. When a function is used for which the color change is necessary, the colors red, yellow, blue and white are used to make the state easy to distinguish. | |
YELLOW | The screen displays in black and white. The LED indicators basically display in yellow. When a function is used for which the color change is necessary, the colors red, blue and white are used to make the state easy to distinguish. | |
ORANGE | The screen displays in black and white. The LED indicators basically display in orange. When a function is used for which the color change is necessary, the colors red, yellow, blue and white are used to make the state easy to distinguish. | |
PINK | The screen displays in black and white. The LED indicators basically display in pink. When a function is used for which the color change is necessary, the colors red, yellow, blue and white are used to make the state easy to distinguish. | |
PURPLE | The screen displays in black and white. The LED indicators basically display in purple. When a function is used for which the color change is necessary, the colors red, yellow, blue and white are used to make the state easy to distinguish. | |
LIGHT BLUE | The screen displays in black and white. The LED indicators basically display in light blue. When a function is used for which the color change is necessary, the colors red, yellow, blue and white are used to make the state easy to distinguish. | |
CYAN | The screen displays in black and white. The LED indicators basically display in cyan. When a function is used for which the color change is necessary, the colors red, yellow, blue and white are used to make the state easy to distinguish. | |
WHITE | The screen displays in black and white. The LED indicators basically display in white. When a function is used for which the color change is necessary, the colors red, yellow and blue are used to make the state easy to distinguish. | |
S/R MODE | When switching the S/R mode, disconnect the cables connected to the INPUT R (return) and OUTPUT R (send) jacks, and reconnect them to the correct connections so that no audio signal loops occur. | |
STEREO I/O | Uses the INPUT R(RETURN)/OUTPUT R(SEND) jacks for INPUT R/OUTPUT R. | |
SEND/RETURN | Uses the INPUT R(RETURN)/OUTPUT R(SEND) jacks for SEND/RETURN. | |