PITCH SHIFT

This effect changes the pitch of the original sound (up or down) within a range of two octaves.

Parameter

Value

Explanation

ON/OFF

OFF, ON

Turns this effect on/off.

VOICE

Selects the number of voices for the pitch shift sound.

1 VOICE

One-voice pitch-shifted sound output in mono.

2 MONO

Two-voice pitch-shifted sound (PS1, PS2) output in mono.

2 STEREO

Two-voice pitch-shifted sound (PS1, PS2) output through left and right channels.

1: PITCH

2: PITCH*

-24–+24

Adjusts the amount of pitch shift (the amount of interval) in semitone steps.

1: LEVEL

2: LEVEL*

0–100

Adjusts the volume of the pitch shifter.

1: MODE

2: MODE*

FAST, MEDIUM, SLOW, MONO

The response is slower in the order of FAST, MEDIUM and SLOW, but the modulation is lessened in the same order.

1: FINE

2: FINE*

-50–+50

Make fine adjustments to the interval. The amount of the change in the Fine 100 is equivalent to that of the Pitch 1.

1: PRE-DELAY

2: PRE-DELAY*

0–300ms, BPMŌ–ŀ

Adjusts the time from when the direct sound is heard until the pitch shifted sounds are heard. Normally you can leave this set at 0 ms.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
  • ŀ is a double whole note, which is twice as long as a whole note.

1: FEEDBACK

0–100

Adjusts the feedback amount of the pitch shift sound.

DIRECT

0–100

Adjusts the volume of the direct sound.