Connecting other devices (rear side)

To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.

USB Computer port

Use a commercially available USB cable to connect this port to your computer. You can create, record and edit music with your computer to transfer performance data and audio signals between this instrument and DAW software (commercially available).

Do not use a USB cable that is designed only for charging a device. Charge-only cables cannot transmit data.

DC In jack

Connect the included AC adaptor to this jack.

Pedal jack

Connect a pedal switch (DP-2, sold separately) or a damper pedal (DP-10, sold separately) here.

This instrument detects the polarity of the pedal at startup, so don’t operate the pedal at this time.

MEMO

When the DP-10 is used with the “Continuous” setting, half-damper signals can be detected. When used with the “Switch” setting, half-damper signals are not detected.

Phones/Output jack

Connect a pair of stereo miniature phone type headphones or a speaker here.