Connecting other devices

Number	Item	Explanation
	USB port (USB Type-C®)	Use the included USB cable to connect your computer or smartphone (iPhone). Connect only the included USB cable to this unit’s USB port. Also, do not use the included USB cable for connecting other devices aside from this unit.
	POWER port (USB Type-C®)	Connect this port to a commercially available USB AC adaptor, or to a mobile battery for smartphones. When supplying power to a smartphone (iPhone) connected to the USB port, use an AC adaptor of 30 W or more that supports USB-PD.
	MIC/LINE (1, 2) connectors	Connect your microphones here. Pin arrangement for the MIC/LINE (1, 2) connectors (XLR) When using a condenser mic that requires external power, set the [48V] switch in the edit screen to ON. Ø “Edit screen” To use a phantom power supply (+48 V), connect a computer or smartphone (iPhone) that can supply 15 W or more, or connect a 15 W or more USB-PD compatible AC adaptor to the POWER port.
	LINE OUT (L, R) jacks	Connect these jacks to your amp or monitor speakers.
	AUX jack	Connect this to your tablet, smartphone or similar device. This jack is compatible with 4-pole mini-phone 3.5 mm plug. When you use a 4-pole mini-phone 3.5 mm cable, you can input the audio from your smartphone and output the mono mix to your smartphone. Ø “ SPLIT AUX OUT” With a cable that uses a three-conductor mini plug, only audio input is available.
	LINE IN (L, R) jacks	Connect your keyboard, guitar, effect unit or similar device here. The LINE IN (L, R) jacks support stereo input.
	MIDI (IN, OUT) connectors	Use a TRS/MIDI connecting cable (BMIDI or BCC series, sold separately) to connect an external MIDI device. Do not use these connectors for connecting to audio devices. Doing so may cause a malfunction.
	GUITAR/BASS jack	Connect your guitar or bass guitar here. For guitars (or bass guitars) going through effect units, use the LINE IN (L, R) jacks.
	PHONES jack	Connect stereo 1/4-inch phone type headphones here.
	PHONES (mini) jack	Connect a stereo miniature phone type (3.5 mm) in-ear monitor or headset microphone here. You can adjust the volume for the PHONES jack and PHONES (mini) jack separately. Ø “ SPLIT MINI”

Connect the instrument, mic, audio player, etc. that you want to record to the GO:MIXER STUDIO.
Connect the included USB cable first to the GO:MIXER STUDIO and then to your smartphone (iPhone).

If you are unable to record on your smartphone (iPhone), slowly repeat step 2.
To prevent malfunction and equipment failure, always turn down the volume and turn off all the devices before making any connections.
In some cases, you may hear noise when you connect a smartphone (iPhone), or when you launch or operate an app.