Adding spatial width and depth to the sound (REVERB)

  1. On the top screen, press the [] button.
  2. Turn the [3] knob to select “REVERB”, and then press the [3] knob.
  3. Use the [ç æ] buttons to switch between pages, and use the [1]–[3] knobs to change the values.

Parameter

Value

Explanation

LEVEL

-Inf, -60–0 [dB]

Sets the volume of the sound after passing through the reverb effect.

SELECTION

R0.3–R37,
H15–H37,
P-B,
P-A

Selects the type of reverb offered by the Roland SRV-2000 digital reverb.

R0.3–R37: Room reverb.
Higher values increase the size of the room.

H15–H37: Hall reverb.
Higher values increase the size of the concert hall.

P-B: Plate reverb.
A more flamboyant reverb sound than P-A.

P-A: Plate reverb.

PRE DELAY

0–160 [msec]

Adjusts the delay time from when the direct sound plays until the reverb sound is heard.

TIME

0.1–99.0 [sec]

Adjusts the decay length of the reverb sound.

HF DAMP

0.05–1.00

Adjusts the high-frequency portion of the reverb.