Connecting the BOSS TONE STUDIO iOS App to the GX-100

  1. Turn on the GX-100 and your mobile device.
  2. Place the mobile device that you want to connect nearby the GX-100.
  3. In your mobile device’s settings, turn Bluetooth on.

  5. NOTE

    Even if the “Devices” list shows “GX-100”, don’t tap it.

  6. Launch the “BOSS TONE STUDIO for GX-100” app that you installed on your mobile device.
  7. The “Terms of Use” screen is shown.
  8. This screen only appears when the app launches for the first time.
  10. Click “ACCEPT” to agree to the contents after you’ve read them.
  11. Tap [Bluetooth MIDI DEVICE] that appears in the screen, and then tap “GX-100”.
  13. If you changed the Bluetooth ID, the changed number is shown following “GX-100”.
  14. If “Bluetooth Pairing Request” appears, tap “Pair”.
  15. Verify that “Connected” is shown.
  17. Tap [<Back] to return to the previous screen.
  18. Verify that “GX-100” is shown for “CONNECT”.
  20. Tap [OK] to start communication.

 

If you can’t connect

Problem

What to check and do

“GX-100” does not show up in the Bluetooth device list on my mobile device

The Bluetooth function might be turned off (disabled).

Bluetooth is enabled when you press the pairing button on the BT-DUAL.

Bluetooth Audio:

A device named “GX-100 Audio” appears.

Connected to an app:

A device named “GX-100 MIDI” appears.

You can check these settings from within an app, such as BOSS TONE STUDIO for GX-100.

Can’t connect to Bluetooth audio

If the “GX-100” is shown in the Bluetooth device list on your mobile device

Temporarily deregister (unpair) the device in the mobile device’s Bluetooth settings. Turn Bluetooth off and then on, and try pairing again.

If “GX-100” is not shown in the Bluetooth device list of your mobile device

Turn the mobile device’s Bluetooth function off and then on again, and initiate pairing from the GX-100 to re-establish pairing.

Can’t connect to the app

After unpairing the “GX-100 MIDI” that is registered on the mobile device, turn the mobile device’s Bluetooth function off and then on again, and reconnect it from within the app (BOSS TONE STUDIO for GX-100)’s settings.

In your mobile device’s Bluetooth setting screen, you tap “GX-100 MIDI” but can’t connect to the app

Make the connection from the settings of the app (BOSS TONE STUDIO for GX-100), not from your mobile device’s Bluetooth settings.

You pressed the BT-DUAL’s pairing button, but can’t connect to the app

You cannot connect simply by press the pairing button on the BT-DUAL.

In the Bluetooth settings of your mobile device, turn the Bluetooth function on, and then connect from the settings of the app (BOSS TONE STUDIO for GX-100).

Can’t connect to a paired mobile device

If the connection fails immediately after it is established, temporarily turning the mobile device’s Bluetooth switch off and then on again may fix the connection.

 

MEMO

If you’ve checked these points and the problem still occurs, please see the BOSS support website.

https://www.boss.info/support/

 

Changing the Bluetooth ID

Here’s how you can specify “1” as the Bluetooth ID.

  1. Press the [MENU] button on the GX-100.
  2. Press HARDWARE SETTINGS.
  3. Press “Bluetooth”.
  4. Edit the “Bluetooth ID” parameter.
  5. Settings: GX-100 AUDIO 1/MIDI 1–GX-100 AUDIO 9/MIDI 9