Effect placement

Adding effects to the chain (insert)

  1. Drag the icons of the effects you like from the palette to somewhere in the effect chain (in the middle of the screen).
  2. This example shows how to move the BOOST effect between X-COMP and OD.
  4. When the “+” icon appears, release your finger.
  6. This places BOOST between X-COMP and OD.

 

Using the [INSERT] button

  1. Tap the effect that comes just before the place in the chain where you want to add an effect (in this example, X-COMP).
  3. Tap the effect on the palette (BOOST) that you want to place into the chain.
  5. Tap the [INSERT] button.
  1. This places BOOST between X-COMP and OD.

 

Replacing effects in the chain with other effects (overwrite)

  1. Drag an effect icon from the palette onto the top of the effect you want to replace.
  2. In this example, we replace OD in the chain with BOOST.
  4. A confirmation message appears once you release your finger.
  6. Touch <OK>.
  7. The OD effect in the chain is now replaced with BOOST.

MEMO

Tap < DON’T ASK AGAIN> at the lower left of the confirmation message, select the  check box and then tap <OK> if you want to delete without seeing the confirmation message from next time.

 

Using the [OVERWRITE] button

  1. Tap the effect you want to replace that’s in the chain (in this case, “OD”).
  2. Tap the effect on the palette (BOOST) that you want to place into the chain.
  3. Tap the [OVERWRITE] button.
  5. A confirmation message appears.
  6. Touch <OK>.
  1. The OD effect in the chain is now replaced with BOOST.

 

Moving effects in the chain

  1. Hold down an icon and drag it from left to right to change the effect’s order in the chain.

 

Deleting effects from the chain

  1. Hold down the icon of the effect you want to delete in the effect chain, and drag it to the palette at the top row on the screen.
  2. Remove your finger once the background of the effect in the palette is highlighted blue.
  4. A confirmation message appears.
  6. Tap <OK>.
  1. If you decide to cancel, tap <CANCEL>.

 

Using the [DELETE] button

  1. Tap the effect icon of the effect in the chain you want to delete.
  2. Tap the [DELETE] button.
  4. A confirmation message appears.
  5. Tap <OK>.
  6. The effect you selected in the chain is now deleted.

MEMO

Due to DSP capacity limits, you may not be able to insert or overwrite an effect, even when the number of connected effects falls within the limits. If there isn’t enough DSP capacity, the icon for the effect you’re trying to newly place in the chain is greyed out, and you cannot place the effect. To place a new effect, you must delete an existing effect. Refer to “Effect placement” in the GX-100 Reference Manual for details on the upper limits for effects and functional devices you can place.