PITCH SHIFTER
Chain | Palette |
---|---|
This effect changes the pitch of the original sound (up or down) within a range of two octaves.
Parameter | Value | Explanation |
---|---|---|
ON/OFF | OFF, ON | Turns this effect on/off. |
VOICE | Selects the number of voices for the pitch shift sound. | |
1 VOICE | One-voice pitch-shifted sound output in mono. | |
2 MONO | Two-voice pitch-shifted sound (PS1, PS2) output in mono. | |
2 STEREO | Two-voice pitch-shifted sound (PS1, PS2) output through left and right channels. | |
1: PITCH 2: PITCH | -24–+24 | Adjusts the amount of pitch shift (the amount of interval) in semitone steps. |
1: FINE 2: FINE | -50–+50 | Make fine adjustments to the interval. The amount of the change in the Fine 100 is equivalent to that of the Pitch 1. |
1: MODE 2: MODE | FAST, MEDIUM, SLOW, MONO | The response is slower in the order of FAST, MEDIUM and SLOW, but the modulation is lessened in the same order. |
1: PRE-DELAY 2: PRE-DELAY | 0–300ms, BPM ŀ–Ō | Adjusts the time from when the direct sound is heard until the pitch shifted sounds are heard. Normally you can leave this set at 0 ms.
|
1: FEEDBACK | 0–100 | Adjusts the feedback amount of the pitch shift sound. |
1: LEVEL 2: LEVEL | 0–100 | Adjusts the volume of the pitch shifter. |
DIRECT LEVEL | 0–100 | Adjusts the volume of the direct sound. |
BPM | 40–250 | Adjusts the BPM value for each memory.
|