TYPE: DUAL parameters

Parameter

Value

Explanation

MODE

SERIES

This is a delay comprising two different delays connected in series.

PARALLEL

This is a delay comprising two delays connected in parallel.

L/R

This delay lets you specify the L and R channels independently.

1: TYPE

2: TYPE

MONO

This is a simple mono delay.

PAN

This delay is specifically for stereo output. This allows you to obtain the tap delay effect that divides the delay time, then deliver them to L and R channels.

ANALOG

Gives a mild analog delay sound.

TAPE

This setting provides the characteristic wavering sound of the tape echo.

1: TIME

2: TIME

1 ms–2000 ms,

BPM ŀ–Ō

Adjusts the delay time.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.

1: FFEDBACK

2: FEEDBACK

0–100

Adjusts the volume of delay that is returned to the input. Higher settings will result in more delay repeats.

1: EFFECT LEVEL

2: EFFECT LEVEL

0–120

Adjusts the volume of the delay sound.

1: HIGH CUT

2: HIGH CUT

20.0 Hz–12.5 kHz, FLAT

Sets the frequency at which the high cut filter begins to take effect. When FLAT is selected, the high cut filter has no effect.

BPM

40–250

Adjusts the BPM value for each memory.

  • BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
  • When you have an external MIDI device connected, the MASTER BPM synchronizes to the external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the MASTER BPM, set “SYNC CLOCK” to “INTERNAL”.

CARRYOVER

OFF, ON

Sets whether to make the sound of the effect carry over or not after you turn it off.