BASS TOUCH WAH
Chain | Palette |
|---|---|
|
|
You can produce a wah effect with the filter changing in response to the bass level.
Parameter | Value | Explanation |
|---|---|---|
ON/OFF | OFF, ON | Turns this effect on/off. |
FILTER | Selects the wah mode. | |
LPF | Low pass filter. Passes only the low-frequency region. | |
BPF | Band pass filter. Passes only the specified frequency region. | |
POLARITY | Selects the direction in which the filter changes in response to the input. | |
DOWN | The frequency of the filter falls. | |
UP | The frequency of the filter rises. | |
SENS | 0–100 | Specifies the sensitivity with which the filter moves in the direction specified by the POLARITY setting. Higher values produce a stronger tone which emphasizes the wah effect. The strength of picking has no effect when this is set to “0”. |
EFFECT LEVEL | 0–100 | Adjusts the volume of the effect sound. |
FREQUENCY | 0–100 | Adjusts the center frequency of the wah effect. |
RESONANCE | 0–100 | Adjusts the intensity of the wah effect in the area around the center frequency. Higher values produce a stronger filter tone that emphasizes the wah effect. A value of 50 produces a standard wah sound. |
DECAY | 0–100 | Adjusts the rate at which the filter is moved. |
DIRECT MIX | 0–100 | Adjusts the volume of the direct sound. |