PLAY OPTION
Here you can specify how the pedals will work during performance.
Parameter | Value | Explanation |
|---|---|---|
BANK MODE | WAIT1 | The display blinks when you press the bank pedal, and you can select a number without switching banks. At the moment you press the bank pedal, the bank and number are confirmed, and the unit switches to the next memory. You can switch to a number within the same bank even when a function besides a number is set for a number pedal. You can also switch banks by pressing the bank pedal while the display is blinking. WAIT1: Returning to the first bank during the display blinking cancels the blinking state. WAIT2: Returning to the first bank during the display blinking does not cancel the blinking state. |
WAIT2 | ||
IMMEDIATE | The memory switches instantly when a BANK pedal or any of the number pedals is pressed. | |
BANK EXTENT MIN | U01–U50 P01–P25 | Sets the lower limit for the banks. |
BANK EXTENT MAX | U01–U50 P01–P25 | Sets the upper limit for the banks. |
LOOP MODE | MONO | Mixes the L/R signals for mono operation. The recording time is 38 seconds. |
STEREO | Operate in stereo. The recording time is 19 seconds. | |
LOOP REC ACTION | Specifies how the looper operates when you press the pedal. | |
RECÓPLAYÓDUB | Operation will switch in the order of Recording Ó Playback Ó Overdubbing. | |
RECÓDUBÓPLAY | Operation will switch in the order of Recording Ó Overdubbing Ó Playback. | |
DELETE WARNING | OFF, ON | Sets whether to show a confirmation message when you try to delete an effect from the effect chain. |
OVERWRITE WARNING | OFF, ON | Sets whether to show a confirmation message when you try to overwrite an effect in the effect chain. |