SLICER

Chain	Palette

This consecutively interrupts (or slices) the sound to create the effect of a rhythm backing phrase being played.


Parameter	Value	Explanation
ON/OFF	OFF, ON	Turns this effect on/off.
PATTERN	P1–P20	Selects the rhythm pattern used to slice up the sound.
RATE	0–100, BPM ŀ–Ō	Adjusts the rate at which the sound is sliced. When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song. If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
TRIGGER	OFF, ON	When you switch this from OFF to ON, the rhythm pattern returns to the beginning. The TRIGGER parameter is saved with the “OFF” setting when you write the memory.
EFFECT LEVEL	0–100	Adjusts the volume of the effect sound.
ATTACK	0–100	Adjusts the attack volume for the rhythm pattern.
DUTY	1–99	Adjusts the duration of the sound for the rhythm pattern.
DIRECT MIX	0–100	Adjusts the volume of the direct sound.
BPM	40–250	Adjusts the BPM value for each memory. BPM (beats per minute) indicates the number of quarter note beats that occur each minute. When you have an external MIDI device connected, the MASTER BPM synchronizes to the external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the MASTER BPM, set “SYNC CLOCK” to “INTERNAL”.