HUMANIZER

Chain

Palette

This alters the guitar audio signal to give it a human-like vocalized sound.

Parameter

Value

Explanation

ON/OFF

OFF, ON

Turns this effect on/off.

MODE

This sets the mode for switching the vowels.

PICKING

Switches from VOWEL1 to VOWEL2 according to your picking. The RATE adjusts the time it takes to switch the vowels.

AUTO

Adjusts the RATE and DEPTH used for switching between the two vowels (VOWEL1 and VOWEL2).

VOWEL1

a, e, i, o, u

Selects the first vowel.

VOWEL2

a, e, i, o, u

Selects the second vowel.

SENS *1

0–100

Adjusts the sensitivity. When it is set to a lower value, no effect of the humanizer is obtained with weaker picking, while stronger picking produces the effect. When it is set to a higher value, the effect of the humanizer can be obtained whether the picking is weak or strong.

RATE

0–100, BPMŀŌ

Adjusts the cycle for changing the two vowels.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.

DEPTH

0–100

Adjusts the depth of the effect.

MANUAL *2

0–100

Adjusts the cycle for changing the two vowels. When this is set to 50, the time it takes to switch between vowels 1 and 2 is the same; and when this is set to a value lower than 50, the time it takes to switch to VOWEL1 is shorter. When it is set to higher than 50, the time for VOWEL 1 is longer.

LEVEL

0–100

Adjusts the volume.

BPM

40–250

Adjusts the BPM value for each memory.

  • BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
  • When you have an external MIDI device connected, the MASTER BPM synchronizes to the external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the MASTER BPM, set “SYNC CLOCK” to “INTERNAL”.
  1. Setting available when MODE is set to PICKING.
  2. Setting available when MODE is set to AUTO.