AUTO WAH

Chain

Palette

This effect changes the filtering over a periodic cycle, producing an automatic wah effect.

Parameter

Value

Explanation

ON/OFF

OFF, ON

Turns this effect on/off.

FILTER

Selects the wah mode.

LPF

Low pass filter. Passes only the low-frequency region.

BPF

Band pass filter. Passes only the specified frequency region.

HPF

High pass filter. Passes only the high-frequency region.

RATE

0–100, BPMŀŌ

Adjusts the cycle or rate of the auto wah.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.

DEPTH

0–100

Adjusts the depth of the auto wah.

EFFECT LEVEL

0–100

Adjusts the volume of the effect sound.

FREQUENCY

0–100

Adjusts the center frequency of the wah effect.

RESONANCE

0–100

Adjusts the intensity of the wah effect in the area around the center frequency.

WAVEFORM

TRI, SINE

Selects the type of wave.

DIRECT MIX

0–100

Adjusts the volume of the direct sound.

BPM

40–250

Adjusts the BPM value for each memory.

  • BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
  • When you have an external MIDI device connected, the MASTER BPM synchronizes to the external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the MASTER BPM, set “SYNC CLOCK” to “INTERNAL”.