WRITE (Saving to memory)

When you want to save a memory you have created, save it as a user memory by following the procedure below. If you do not save the memory, the edited settings will be lost when you turn off the power or switch to another memory.

  1. Press the [WRITE] button.
  2. Touch <WRITE> (or press the [1] knob).
  3. Use the [1] knob to select the save-destination (U01-1–U66-3).
  4. Hold down the [1] knob and then turn it to move between banks.
  5. You can use the [2]–[4] knobs to edit the name.
  6. To edit the memory name, use the PAGE [÷] [ø] buttons to move the cursor and use the [SELECT] knob to change the character.
  7. Operation

    Function

    Turn the [2] knob

    Selects the type of characters

    Turn the [3] knob

    Switches uppercase/lowercase

    Press the [3] knob

    Deletes one character (delete)

    Turn the [SELECT] knob

    Changes the character

    Press the [4] knob

    Inserts one space (insert)

    Press the [÷] [ø] buttons

    Moves the cursor

    Touch <DELETE ALL>

    Deletes all characters

  8. Touch <EXEC: [WRITE]> on the screen (or press the [WRITE] button).