PLAY OPTION

Here you can specify how the pedals will work during performance.

Parameter

Value

Explanation

BANK MODE

WAIT1

When you switch to a different bank, the display changes but the memory does not change yet. Once you press a pedal on the unit, the bank and number are confirmed, which switches to the next memory.

WAIT2

The display blinks when you switch between banks, and you can select a number without switching the bank. Once you press a pedal on the unit, the bank and number are confirmed, which switches to the next memory. You can also switch banks by pressing the bank pedal while the display is blinking.

IMMEDIATE

The unit switches to the next memory instantly when any pedal is pressed.

BANK EXTENT MIN

U01–U66

P01–P33

Sets the lower limit for the banks.

BANK EXTENT MAX

U01–U66

P01–P33

Sets the upper limit for the banks.

LOOP MODE

MONO

Mixes the L/R signals for mono operation.

The recording time is 38 seconds.

STEREO

Operate in stereo.

The recording time is 19 seconds.

LOOP REC ACTION

Specifies how the looper operates when you press the pedal.

RECÓPLAYÓDUB

Operation will switch in the order of Recording Ó Playback Ó Overdubbing.

RECÓDUBÓPLAY

Operation will switch in the order of Recording Ó Overdubbing Ó Playback.

DELETE WARNING

OFF, ON

Sets whether to show a confirmation message when you try to delete an effect from the effect chain.

OVERWRITE WARNING

OFF, ON

Sets whether to show a confirmation message when you try to overwrite an effect in the effect chain.

É & Ç

OFF, TUNER, DOWN, UP

Sets the functions of the footswitches when pressed at the same time.

  • This is only enabled in up/down mode or manual mode.

Ç & CTL1

OFF, MANUAL, DOWN, UP

Sets the functions of the footswitches when pressed at the same time.

  • This is only enabled in up/down mode or manual mode.