Adjusting the expression pedal (pedal calibration)

Although this unit’s expression pedal has been set for optimum operation at the factory, extended use and the operating environment can result in the pedal going out of adjustment.

If you encounter problems such as being unable to fully cut off the sound with the volume pedal or being unable to switch the PEDAL FX, you can use the following procedure to readjust the pedal.

  1. Press the [MENU] button.
  3. Touch <HARDWARE SETTINGS>.
  5. Touch <PEDAL CALIBRATION>.
  6. The PEDAL CALIBRATION screen appears.
  8. Press the heel end of the pedal, and press the [WRITE] button.
  9. The screen will indicate “OK,” and then a screen like the following will appear.
  11. Press the toe end of the pedal, and press the [WRITE] button.
  12. The screen will indicate “OK,” and then a screen like the following will appear.
  14. Strongly press the toe end of the pedal.
  15. Verify that the PEDAL FX indicator lights when you strongly press the toe end.
  16. If you want to change the lighting sensitivity of the PEDAL FX indicator, repeat step 4 while you adjust the THRESHOLD value with the [4] knob.
  17. Press the [WRITE] button.
  18. The screen will indicate “COMPLETED!”
  19. When you operate the expression pedal, please be careful not to get your fingers pinched between the movable part and the panel. In places where small children are present, make sure that an adult provides supervision and guidance.