AUTO WAH

HEXARAY: Spectrum meter

This effect changes the filtering over a periodic cycle, producing an automatic wah effect.

Parameter	Value	Explanation
ON/OFF	OFF, ON	Turns this effect on/off.
FILTER	Select the wah mode.
	LPF	Low pass filter. Passes only the low-frequency region.
	BPF	Band pass filter. Passes only the specified frequency region.
	HPF	High pass filter. Passes only the high-frequency region.
RATE	0–100 ms, BPM ŀ–Ō	Adjusts the cycle or rate of the auto wah. When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song. If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time. ŀ is a double whole note, which is twice as long as a whole note.
DEPTH	0–100	Adjusts the depth of the auto wah.
LEVEL	0–100	Adjusts the volume.
FREQ	0–100	Adjusts the center frequency of the wah effect.
RESO	0–100	Adjusts the intensity of the wah effect in the area around the center frequency. Higher values produce a stronger filter tone that emphasizes the wah effect. A value of 50 produces a standard wah sound.