PAN

This delay is specifically for stereo output.

This allows you to obtain the tap delay effect that divides the delay time, then deliver them to L and R channels.

Parameter

Value

Explanation

TIME

1–2000 ms, BPM Ō–ŀ

Adjusts the delay time.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
  • ŀ is a double whole note, which is twice as long as a whole note.

FEEDBACK

0–100

Adjusts the volume of delay that is returned to the input. Higher settings will result in more delay repeats.

LEVEL

1–120

Adjusts the volume of the delay sound.

HIGH CUT

20.0 Hz–12.5 kHz, FLAT

Sets the frequency at which the high cut filter begins to take effect. When FLAT is selected, the high cut filter has no effect.

TAP TIME

0–100%

Adjusts the delay time of the right channel delay.

This setting adjusts the R channel delay time relative to the L channel delay time (considered as 100%).