SHIMMER

Delay with pitch-shifted sound mixed in.

Parameter

Value

Explanation

ON/OFF

OFF, ON

Turns this effect on/off.

TIME

1 ms–2000 ms, BPM ŀ–Ō

Adjusts the delay time.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
  • ŀ is a double whole note, which is twice as long as a whole note.

FEEDBACK

0–100

Adjusts the volume of delay that is returned to the input. Higher values increase the number of delay repeats.

LEVEL

0–120

Adjusts the volume of the delay sound.

HIGH CUT

20.0 Hz–12.5 kHz, FLAT

Sets the frequency at which the high cut filter begins to take effect. When FLAT is selected, the high cut filter has no effect.

PITCH

-24–+24

Lets you freely specify the amount of pitch shift for the delay.

BALANCE

0–100

Adjusts the balance between the pitch-shifted sound that is input to the delay and the direct sound.