FUNCTION
ÉSW, ÇSW, CTL1, CTL2, CTL3, EXP1 SW, EV EXP SW, EV CTL1, EV CTL2, FS L SW, FS C SW, FS R SW, FS CTL1, FS CTL2
Parameter | Value | Explanation |
|---|---|---|
FUNCTION | OFF | No assignment. |
DOWN | Switches to the previous memory. | |
UP | Switches to the next memory number. | |
BPM TAP | Used for tap input of the MASTER BPM. | |
TUNER | Switches the TUNER on and off. | |
PEDAL FX | Switches the PEDAL FX on/off. | |
FX1/COMP | Switches the FX1/COMP on/off. | |
OD/DS | Switches OD/DS on/off. | |
AMP/CAB | Switches the AMP/CAB on/off. | |
FX2/EQ | Switches the FX2/EQ on/off. | |
FX3/MOD | Switches FX3/MOD on/off. | |
DELAY | Switches the delay on/off. | |
REVERB | Switches the reverb on/off. | |
FX1 SOLO | Turns the solo function for FX1 OD/DS on/off. | |
FX2 SOLO | Turns the solo function for FX2 OD/DS on/off. | |
FX3 SOLO | Turns the solo function for FX3 OD/DS on/off. | |
OD/DS SOLO | Turns the solo function for OD/DS on/off. | |
AMP SOLO | Turns the solo function for AMP/CAB on/off. | |
FX1 TRIG | Switches the FX1 TRIGGER on and off. | |
FX2 TRIG | Switches the FX2 TRIGGER on and off. | |
FX3 TRIG | Switches the FX3 TRIGGER on and off. | |
DLY TRIG | Switches the DELAY TRIGGER on and off. | |
REV TRIG | Switches the REVERB TRIGGER on and off. | |
LOOP ON/OFF | Switches the looper on/off. | |
LOOP CTL | Controls the looper. | |
LOOP STOP | Stops the phrase. | |
LOOP CLEAR | Clears the phrase. | |
MODE | Sets the action of the value for each operation.
| |
TOGGLE | The setting is toggled On (maximum value) or Off (minimum value) with each press of the footswitch. | |
MOMENT | The normal state is Off (minimum value), with the switch On (maximum value) only while the footswitch is depressed. | |
PREF | MEMORY, SYSTEM | When set to MEMORY, you can use different settings for each memory. When set to SYSTEM, the same settings can be shared between all memories. |
SOLO LEVEL | 0–100 | Adjusts the volume when FX1 SOLO, FX2 SOLO, FX3 SOLO, OD/DS SOLO, and AMP SOLO are turned on.
|
EXP1, EXP2, EV EXP, FS EXP
Parameter | Value | Explanation |
|---|---|---|
FUNCTION | OFF | No assignment. |
FOOT VOLUME | Foot volume will be assigned. | |
PEDAL FX | Assigns the PEDAL FX. | |
PDL FX/FV | Assigns the foot volume and the PEDAL FX. | |
FV+TU | Foot volume will be assigned. TUNER is displayed if the pedal is returned all the way. | |
FV+TU/PDL FX | Assigns the foot volume and the PEDAL FX. TUNER is displayed if the pedal is returned all the way when using foot volume. | |
PREF | MEMORY, SYSTEM | When set to MEMORY, you can use different settings for each memory. When set to SYSTEM, the same settings can be shared between all memories. |