GLOBAL EQ
This adjusts the tone of the OUTPUT regardless of the equalizer on/off settings of individual memories. You can save up to three settings.
Parameter | Value | Explanation |
|---|---|---|
SET | Selects the GLOBAL EQ setting. | |
OFF | Turns GLOBAL EQ off. | |
SET1–SET3 | Switches between settings 1–3. | |
LOW GAIN | -20–+20 dB | Adjusts the low frequency range tone. |
HIGH GAIN | -20–+20 dB | Adjusts the high frequency range tone. |
MID FREQ | 20.0 Hz–12.5 kHz | Specifies the center of the frequency range that will be adjusted by the MID GAIN. |
MID Q | 0.5–16 | Adjusts the width of the area affected by the EQ centered at the MID FREQ. Higher values will narrow the area. |
MID GAIN | -20–+20 dB | Adjusts the midrange balance. |
LOW CUT | FLAT, 20.0 Hz–12.5 kHz | Sets the frequency at which the low cut filter begins to take effect. When “FLAT” is selected, the low cut filter has no effect. |
HIGH CUT | 20.0 Hz–12.5 kHz, FLAT | Sets the frequency at which the high cut filter begins to take effect. When FLAT is selected, the high cut filter has no effect. |
LEVEL | -20–+20 dB | Adjusts the overall volume level of the equalizer. |