ASSIGN parameter list
Parameter | Value | Explanation |
|---|---|---|
SW | OFF, ON | Turns the ASSIGN 1–8 on/off. |
SOURCE | Specifies the controller (source). | |
CTL1 (C1) | Assigns the [CTL1] (C1) switch on this unit. | |
CTL2 | Assigns the functions of the external footswitch connected to the CTL 2, 3/EXP2 jacks (FS-5U, FS-6, FS-7; sold separately). | |
CTL3 | ||
EXP1 SW | Assigns the EXP switch on this unit. | |
EXP1 | Assigns the EXP pedal on this unit. | |
EXP2 | Assigns the external expression pedal (such as an EV-5; sold separately) connected to the CTL 2, 3/EXP 2 jack. | |
EV EXP SW | Assigns the EXP2 pedal on the EV-1-WL. | |
EV CTL1 | Assigns CTL1 on the EV-1-WL. | |
EV CTL2 | Assigns CTL2 on the EV-1-WL. | |
EV EXP OFF | Assigns EXP when the EXP switch for the EV-1-WL is OFF. | |
EV EXP ON | Assigns EXP when the EXP switch for the EV-1-WL is ON. | |
FS L SW | Assigns the left switch of the FS-1-WL. | |
FS C SW | Assigns the center switch of the FS-1-WL. | |
FS R SW | Assigns the right switch of the FS-1-WL. | |
FS CTL1 | Assigns CTL1 on the FS-1-WL. | |
FS CTL2 | Assigns CTL2 on the FS-1-WL. | |
FS EXP | Assigns EXP on the FS-1-WL. | |
DOWN SW | Assigns the É switch on this unit. | |
UP SW | Assigns the Ç switch on this unit. | |
MODE | Sets the action of the value for each operation.
| |
TOGGLE | The setting is toggled On (maximum value) or Off (minimum value) with each press of the footswitch. | |
MOMENT | The normal state is Off (minimum value), with the switch On (maximum value) only while the footswitch is depressed. | |
CATEGORY | This selects the parameter to be changed. | |
TARGET | ||
MIN | This sets the minimum value for the range in which the parameter can change. The value differs depending on the parameter assigned for TARGET parameter. | |
MAX | This sets the maximum value for the range in which the parameter can change. The value differs depending on the parameter assigned for TARGET parameter. | |