Supplying power to this unit
Installing the batteries
Install four alkaline batteries (AA, LR6) in the battery compartment located on the bottom of the unit.
- When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit carefully; do not drop it.
- If you handle the battery improperly, you risk explosion and fluid leakage. Make sure that you carefully observe all of the items related to batteries that are listed in the “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (“Read This First”) leaflets for proper use.
- We recommend that you keep batteries installed in the unit even though you’ll be powering it with the AC adaptor. That way, you’ll be able to continue a performance even if the cord of the AC adaptor gets accidentally disconnected from the unit.
- Batteries should always be installed or replaced before connecting any other devices. This way, you can prevent malfunction and damage.
- “BATTERY LOW” will appear on the display if the batteries are low. Replace the batteries with new ones.
Supplying power via the USB port (using USB bus power)
- Connect the commercially available USB Type-C® cable to a 5V USB AC adaptor or to the USB port on your computer.
- Connect your guitar to the INPUT jack on this unit, and turn on the power.