Rear panel

To prevent malfunction and equipment failure, always turn down the volume, and turn off all of the devices before making any connections.

MEMO

If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.


Controller	Explanation
[POWER] switch	Turns the power on/off.
USB Type-C® port (ă)	Use a commercially available USB Type-C® cable to connect this port to your computer. Both MIDI and audio data can be transferred. You must install the USB driver if you want to connect this unit to your computer. Download the driver from the Roland website. For details, refer to “Readme.htm” in the downloaded files. https://www.roland.com/support/ NOTE Do not use a USB cable that is designed only for charging. Charge-only cables cannot transmit data.
[VOLUME] knob	Adjusts the volume.
PHONES jack	Used for connecting headphones (sold separately).
OUTPUT jack	Connect this jack to your amp or monitor speakers.
MIX IN jack	Used for inputting audio. The sound from connected devices is output from the built-in speaker as well as the PHONES and OUTPUT jacks.
MIDI connectors	Connect a MIDI device to these connectors using commercially available MIDI cables.