Configuring the parts
These parameters configure the overall settings for the parts.
MEMO
If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.
Step buttons | Item (Parameter name) | Value | Explanation |
|---|---|---|---|
[1] | UoL (Part Volume) | 0–127 | Adjusts the part volume. You can adjust this parameter for each pattern. |
[2] | PAn (Part Pan) | L64–r63 | Sets the pan position for each part. |
[3] | PoLy (Poly Mode) | This configures how polyphonic mode operates. | |
orG | Operates with the maximum polyphony of the original model. | ||
AdU | Operates with the maximum polyphony of this unit. | ||
[4] | F.typ (Vintage Flt Type) | 1, 2, 3 | Sets the characteristics of how the low-pass filter changes the sound, modeled after a classic analog synthesizer low-pass filter (LPF). |
[5] | P.Nod (Porta Mode) | OFF, On | Turns the portamento on/off. When this is on, the pitch of the second note you play glides continuously from the first note. |
[6] | P.tiN (Porta Time) | 0–1023 | Adjusts the time over which the portamento effect changes the pitch. |
[7] | P.CrU (Porta Crv) | This sets the curve used by the portamento effect to change the pitch. | |
orG | The same curve of change used on the original model is applied. | ||
LinE | A linear curve of change is applied. | ||
E.1 | A non-linear curve (gradual slope) of change is applied. | ||
E.2 | A non-linear curve (steep slope) of change is applied. | ||
[8] | Kbd (Key Mode) | Specifies the voicing method used. | |
PoLy | Plays multiple tones (polyphonic). | ||
SoLo | Plays single tones. | ||
Uni | Plays in unison. | ||
S.Uni | Plays single tones in unison. | ||
[9] | tvnE (Coarse Tune) | -48–48 | Specifies the pitch in semitones (maximum ±4 octaves). |
[10] | PCH (Pitch Drift) | 0–255 | Adjusts the amount of minor pitch deviation heard when a note plays, similar to that of an analog synthesizer. |
[11] | EXP (Param Expansion) | OFF, On | When this is on, the amount of change made by the LFO RATE, VCO CUTOFF FREQ, VCF RES and VCF ENV is expanded (increased) beyond that of the original model. |
[12] | Cndi (Condition) | 0–100 | Adds a deteriorated effect to the sound. |