Selecting a pattern

The notes you play into the sequencer are saved in a memory called a “pattern”. You can recall all kinds of performance patterns by selecting (switching between) the patterns.

The patterns are organized by group (A, B), bank (1–8) and preset (A–F), letting you save a total of 2 × 8 × 6 = 96 patterns.

  1. Hold down the [HOLD PRESET] (START) button and press the PATCH BANK [1–4], [5–8] buttons.
  3. This selects the group and bank.

  5. MEMO

    Press and hold the [HOLD PRESET] (START) button and repeatedly press the same PATCH BANK [1–4] or [5–8] button to cycle through the groups (A–B) and banks (1–4 or 5–8). (Example: A.1ÓA.2ÓA.3ÓA.4ÓB.1ÓB.2ÓB.3ÓB.4ÓA.1…)

  6. Hold down the [HOLD PRESET] (START) button and press one of the PATCH NUMBER/PRESET [1/A]–[6/F] buttons.
  8. This selects the pattern.

MEMO

  1. By turning the [VALUE] knob while holding down the [HOLD PRESET] (START) button, you can select all patterns in order.
    By turning and pressing the [VALUE] knob while holding down the [HOLD PRESET] (START) button, you can switch between groups.
  2. When you press the [MENU] button while holding down the [HOLD PRESET] (START) button, the [HOLD PRESET] (START) button remains in a pressed-down state. If you take your finger off the [HOLD PRESET] (START) button at this time, you can change the bank or preset. To restore the button to normal, press the [MENU] button.