Reverse Dly
MEMO
- You can also press a corresponding step button to select the parameter items.
- If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.
Step buttons | Parameter | Value | Explanation |
|---|---|---|---|
[1] | tyPe | R.dLy | This is a reverse delay that adds a reversed and delayed sound to the input sound. A tap delay is connected immediately after the reverse delay. |
[2] | Sľ | Off, On | Turns the effect on/off. |
[3] | Sync | Off, On | When this is “ON”, the effect synchronizes with the tempo of the rhythm. |
[4] | TiNE | 1–1300 (ms) | Delay time from when the direct sound until the delay sound is heard |
[5] | notE | ||
[6] | Fb | -98–98 (%) | Proportion of the delay sound that is fed back into the effect (negative values invert the phase) |
[7] | bAL | Volume balance between the effect sound and dry (original) sound | |
0–100 | 0 (Effect sound = 0: dry sound = 100) 100 (Effect sound = 100: dry sound = 0) | ||
[8] | EQ.Lo | -15–15 (dB) | Amount of low range boost/cut |
[9] | EQ.Hi | -15–15 (dB) | Amount of high range boost/cut |
[10] | LEU | 0–127 | Output level |