LOFI Compress
MEMO
- You can also press a corresponding step button to select the parameter items.
- If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.
Step buttons | Parameter | Value | Explanation |
|---|---|---|---|
[1] | tyPe | L.CNP | Degrades the tonal character. |
[2] | Sľ | Off, On | Turns the effect on/off. |
[3] | CONP | 1–6 | Type of filter applied to the sound before it passes through the Lo-Fi effect 1: Compressor off 2–6: Compressor on |
[4] | LoFi | 1–9 | Degrades the tonal character. The tonal character degrades as this value is increased. |
[5] | FiLt | Type of filter applied to the sound after it passes through the Lo-Fi effect | |
OFF | Filter is not used | ||
LPF | Cuts the high frequencies | ||
HPF | Cuts the low frequencies | ||
[6] | C.Off | 1–16 | The center frequency of the post filter. Larger values increase the cutoff frequency. |
[7] | EQ.Lo | -15–15 (dB) | Amount of low range boost/cut |
[8] | EQ.Hi | -15–15 (dB) | Amount of high range boost/cut |
[9] | bAL | Volume balance between the effect sound and dry (original) sound | |
0–100 | 0 (Effect sound = 0: dry sound = 100) 100 (Effect sound = 100: dry sound = 0) | ||
[10] | LEU | 0–127 | Output level |