Super Filter
MEMO
- You can also press a corresponding step button to select the parameter items.
- If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.
Step buttons | Parameter | Value | Explanation |
|---|---|---|---|
[1] | type | FiLt | This is a filter with an extremely sharp slope (attenuation characteristics). The cutoff frequency can be varied cyclically. |
[2] | Sľ | Off, On | Turns the effect on/off. |
[3] | tyPE | Frequency range that passes through each filter | |
LPF | Frequencies at or below the cutoff | ||
bPF | Frequencies in the region of the cutoff | ||
HPF | Frequencies at or above the cutoff | ||
notc | Frequencies other than the region of the cutoff | ||
[4] | SLoP | Filter slope (attenuation characteristics; amount of attenuation per octave) | |
(dB) | Gentle | ||
(dB) | Steep | ||
(dB) | Extremely steep | ||
[5] | C.OFF | 0–127 | Cutoff frequency of the filter Increasing this value raises the cutoff frequency. |
[6] | rESo | 0–100 | Filter resonance level Increasing this value emphasizes the region near the cutoff frequency. |
[7] | GAin | 0–12 (dB) | Amount of boost for the filter output |
[8] | Nod | Off, On | On/off switch for cyclic change |
[9] | Nod.ľ | These waves control how the cutoff frequency changes. | |
tri | Triangle wave | ||
Sqr | Square wave | ||
Sin | Sine wave | ||
Saľ1 | Sawtooth wave (upward) | ||
Saľ2 | Sawtooth wave (downward) | ||
[10] | Sync | Off, On | When this is “ON”, the effect synchronizes with the tempo of the rhythm. |
[11] | TiNE | 0.05–10.00 (Hz) | Rate of modulation |
[12] | notE | ||
[13] | dePt | 0–127 | Depth of modulation |
[14] | AtK | 0–127 | Speed at which the cutoff frequency changes The Nod.ľ parameter is effective when using a square wave or sawtooth wave (upward or downward). |
[15] | LEU | 0–127 | Output level |