Configuring the modulation

These are the settings for modulation.

MEMO

If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.

Step buttons

Item

(Parameter name)

Value

Explanation

[1]

bd.UP

(Bend Range Up)

0–48

Sets the amount of change (in semitones) made when the pitch bend lever is pushed up to maximum. For example, when this is set to “48” and you push the pitch bend lever all the way up, the pitch goes up four octaves.

[2]

bd.dn

(Bend Range Down)

0–48

Sets the amount of change (in semitones) made when the pitch bend lever is pulled down to maximum. For example, if you set this to “48” and pull the pitch bend lever all the way down, the pitch goes down four octaves.

[3]

P.CrU

(Portamento Curve Type)

This sets the curve used by the portamento effect to change the pitch.

LinE

A linear curve of change is applied.

EXP

A non-linear curve of change is applied.

[4]

P.Nod

(Portamento Mode)

This sets the playing style for applying portamento.

norN

Portamento is always applied.

LGto

Portamento is only applied when you play in legato style (playing one key and then playing the next while holding down the first one).

[5]

N.dSt

(Mod Destination)

Selects what the modulation operates.

P.LFO

Pitch LFO Depth

F.LFO

Filter LFO Depth

A.LFO

Amp LFO Depth

P.Nod

P-MOD Depth

S.Nod

S-MOD Depth

P_S.N

P&S-MOD Depth

ľ.POS

WT Pos Depth

NX.rh

Mix/Rough Depth

PO.NX

WT Pos&Mix Depth

[6]

N.PCH

(Mod Pitch LFO Depth)

-63–63

Sets the depth of modulation when it is used to control the Pitch LFO Depth.

[7]

N.FLt

(Mod Filter LFO Depth)

-63–63

Sets the depth of modulation when it is used to control the Filter LFO Depth.

[8]

N.ANP

(Mod Amp LFO Depth)

-63–63

Sets the depth of modulation when it is used to control the Amp LFO Depth.

[9]

N.POS

(Mod WT Pos Depth)

-63–63

Sets the depth of modulation when it is used to control Wavetable Position.

  • This is enabled for patches for which Drawing Switch is set to “OFF”.

[10]

N.NIX

(Mod Mix/Rough Depth)

-63–63

Sets the depth of modulation when it is used to control Layer Mix and Morph Rough.

  • This is enabled for patches for which Drawing Switch is set to “OFF”.

[11]

N.P_N

(Mod WT Pos&Mix Depth)

-63–63

Sets the depth of modulation when it is used to control the Wavetable Position and Layer Mix.

  • This is enabled for patches for which Drawing Switch is set to “OFF”.

[12]

N. ľP

(Mod P-MOD Depth)

-63–63

Sets the depth of modulation when it is used to control Phase Modulation X, Y.

[13]

N. ľS

(Mod S-MOD Depth)

-63–63

Sets the depth of modulation when it is used to control the Shaping Modulation, Shaping Depth and Drive.

[14]

N.P_S

(Mod P&S-MOD Depth)

-63–63

Sets the depth of modulation when it is used to control the Phase Modulation X, Y, the Shaping Modulation, Shaping Depth and Drive.