Configuring the EQ
These are the settings for the patch EQ.
MEMO
If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.
Step buttons | Item (Parameter name) | Value | Explanation |
|---|---|---|---|
[1] | Sľ (EQ Switch) | OFF, On | Turns the equalizer on/off for the patch. |
[2] | L.Gin (EQ Low Gain) | -24.0–24.0 | Adjusts the boost/cut of the low frequency range. |
[3] | N.Gin (EQ Mid Gain) | -24.0–24.0 | Adjusts the amount of boost/cut of the mid-frequency range. |
[4] | H.Gin (EQ High Gain) | -24.0–24.0 | Adjusts the boost/cut of the high frequency range. |
[5] | L.Frq (EQ Low Frequency) | 20–16000 | Sets the center frequency of the low range. |
[6] | N.Frq (EQ Mid Frequency) | 20–16000 | Sets the center frequency for the mid-frequency range. |
[7] | H.Frq (EQ High Frequency) | 20–16000 | Sets the center frequency of the high range. |
[8] | N.``q (EQ Mid Q) | 0.5–16.0 | Sets the bandwidth of the mid-frequency range. Higher values make the bandwidth narrower. |
MEMO
For the EQ, the values that were set are applied when a note sounds.