Saving the sample pad, pattern and effect parameter settings (WRITE)

Use the following operation to save different types of data.

  1. Press the [TIE] (WRITE) button while holding down the [SHIFT] button.
  2. Use the [TEMPO/VALUE] knob to choose the data to save.
  3. Cell_vertical_blue

    Display

    Explanation

    ALL

    Saves the parameters for all sample pads and saves all patterns.

    PAd

    Saves the parameters of the currently selected sample pad.

    Pd.AL

    Saves the parameters for all sample pads.

    Ptn

    Saves the currently selected pattern.

    Pt.AL

    Saves all patterns.

    EFCt

    Saves all effect parameters (including the effect types you select with the [MFX] button).

  4. Press the [C´] (ENTER) button.
  5. The data corresponding to the type you selected above is saved.
  6. To cancel the operation, press the [C] (EXIT) button.

MEMO

  1. A dot (·) is shown in the lower right of the display once you edit a pattern.
    The dot disappears once you save the pattern.
  3. If you turn off the power, any parameters or effect parameters you haven’t saved for the patterns and sample pads revert to their last-saved state.