Inputting your performance by hand (step input)

This shows how to use the step buttons to manually input the notes of your performance.

  1. Press a sample pad or the [GRANULAR] pad to select the pad to which you want to input your performance.
  2. The selected pad lights up.

  3. MEMO

    Press a sample pad or the [GRANULAR] pad while holding down the [PATTERN] button to select a pad without playing it back.

  4. Press the step buttons to select which steps trigger the pad (timing).
  5. The step buttons corresponding to the steps you select light up, and the notes are inputted.
  6. Press a step button that’s lit up to delete that button’s note.

MEMO

  1. You can record the knob values (the motion function) into a step by turning the [PITCH], [START], [END] or [LEVEL] knob while holding down a step button.
    This lets you accurately reproduce the recorded knob values for each step of a pattern that’s playing.
    Refer to “Recording knob movement in steps (motions)” for details.
  2. You can restore the pattern settings to how they were before they were edited.
    Refer to “Restoring the current pattern settings to their original state” for details.
  3. You can also restore just the pattern sequence data to how it was before editing.
    Refer to “Restoring the sequence data of the current pattern” for details.