SAMPLE EDIT (P.ENV) settings
These are the parameters (items to set) you see when you press the [F´] (P.ENV) button while holding down the [SHIFT] button.
MEMO
- You can edit a parameter’s settings when a sample pad is selected.
You can’t configure the settings when the [GRANULAR] pad is selected. - Refer to “Examples of pitch envelope parameter settings” for details on the envelope that’s based on the settings for each parameter.
MEMO
If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.
Parameter | Display | Controller | Value | Explanation |
|---|---|---|---|---|
P.Env Mode | P.Env |
| ADSR (ADSR) | Changes the pitch using a typical ADSR (attack-decay-sustain-release) curve. |
ADR (ADR) | Changes the pitch in the AÓDÓR phases of the envelope, without waiting for you to release the key. | |||
ADA.C (Cyclic) | Changes the pitch over the AÓDÓAÓ... repeating cycle of the envelope while the key is held down. | |||
P.Env Attack | P.Atk | [PITCH] knob | 0–255 (0–10 sec) | Sets the attack time (A). |
P.Env Decay | P.dCy | [START] knob | 0–255 (0–10 sec) | Sets the decay time (D). |
P.Env Sustain | P.SUS | [END] knob | 0–255 | Adjusts the sustain level (S). On the P-6, the envelope shape for the overall pitch automatically adapts based on the sustain level, so that the sustain level remains at the original pitch. |
P.Env Release | P.rEL | [LEVEL] knob | 0–255 (0–10 sec) | Sets the release time (R). |
P.Env Time Key Follow | t.Ky.F | [CTRL1] knob | 0–255 | This lets you modify how fast the changes in pitch occur that you set using the P.Env Attack, P.Env Decay and P.Env Release parameters, according to the key that’s played or triggered. Larger values result in a shorter time to change the pitch as you play higher keys, and a longer time to change the pitch as you play lower keys. Smaller values result in a fixed amount of time to change the pitch, regardless of the key you play. |
P.Env Velocity Sens | vEL.S | [CTRL2] knob | 0–255 | This lets you modify how much the pitch changes according to velocity, as set using the P.Env Attack, P.Env Decay, P.Env Release parameters. Larger values result in a greater degree of change as the velocity increases, and a smaller degree of change as the velocity decreases. Smaller values result in a fixed degree of change, regardless of velocity. |
P.Env Envelope Depth | Ev.dP | [CTRL3] knob | -100–100 | This lets you modify the maximum amount of pitch change caused by the envelope (P.Env Attack, P.Env Decay, P.Env Release) parameters. Positive (+) values make the pitch rise, and negative (-) values make the pitch fall. |